For customer who wants a solid firm setup for their cable testing, the CCT-01 tester allows a custom adapter to be constructed to fit in any of your unique connectors.
You can buy ready-made adaptors from us or you can Do-It-Yourself the adaptors design and fabrication yourself.
For DIY fans, do check out the CCT-01 cable tester physical layout dimension that we provide on this page.
Standard adapter boards
- CCT-01-A001 1.5mm prototyping board
- CCT-01-A002 2.54mm prototyping board
- CCT-01-A003 USB 3.0, type-A
- CCT-01-A004 USB-C
- CCT-01-A005 Ethernet RJ45
- CCT-01-A006 RS232 (d-sub09 male)
- CCT-01-A007 RS232 (d-sub09 female)
- CCT-01-A010 JST ZH 1.5mm
Custom adapter board is available.
Please email us for further enquiry.
CCT-01-A001 1.5mm Prototyping Adapter
DIY prototype adapter with 1.5mm pitch soldering pads.
weight: 14g (3*3+5)
CCT-01-A002 2.54mm Prototyping Adapter
DIY prototype adapter with 2.54mm pitch soldering pads.
weight: 14g (3*3+5)
CCT-01-A003 USB 3.0 socket
USB 3.0 socket connector adapter.
weight: 17g (2*3+3+8)
CCT-01-A004 USB-C socket
USB type C socket connector adapter.
weight: 10g (2*3+3+1)
CCT-01-A005 Ethernet RJ45 socket
Layout of the adapter “CCT-01-A005 Ethernet RJ45” for testing of the connectivity of your RJ45 Ethernet cable.
weight: 30g (3*3+5+8+8)
CCT-01-A006 RS232 (male)
D-sub 9 pins (male) adapter connector.
weight: 17g (2*3+3+8)
 - PCB.png)
CCT-01-A007 RS232 (female)
D-sub 9 pins (female) adapter connector.
weight: 17g (2*3+3+8)
 - PCB.png)
CCT-01-A010 JST header
JST connector, ZH series (1.5mm pitch).
- 2 pos
- 3 pos
- 4 pos
- 5 pos
weight: 5g (1*3+1+1)
Connector Layout Dimension on CCT-01 Cable Tester
The following provides layout dimension of the CCT-01 cable tester.
This allows you to Do-It-Yourself, to design and fabricate your own connector adaptor for CCT-01 cable tester.
The terminal blocks connectors A B C D E F G H are equally spaced out. The pin to pin distance (pitch) between the connectors is 13.97mm.
Manufacturer Part Number
- 8p Phoenix Contact, part number: 1875483 (datasheet)
- 4p Phoenix Contact, part number: 1875441 (datasheet)
Custom Adapter Board Production Service
Thinking of making an adapter board for your unique connector socket?
We provide service to custom make an adapter board with your connector socket for use with CCT-01 cable tester. The cable connection setup will be solid and firm. It keeps your test bench setup neater.
We can get it done for you.
Order Custom Adapter Board Here
- Simply look for this service “Customised Adapter Board for Connector” from our online store (see the “Buy Now” button below).
- Choose the total number of pins of your connector/connectors.
- Proceed to “Buy Now” and make your payment.
- Send an email to us, indicating your online order number #IOaT-????, together with your connector’s part number and datasheet.
Order here ->